TRIP COMPUTER
2
SERVICE
INTERVALS
Service
1000KM/
12month
Mileage before service
With the ignition switched on, the engine not running and the display set to
“SERVICE INTERVALS”, press the button
1
or
2
for approximately 10 sec-
onds to display the mileage before service (distance or time to the next
service). When the distance value approaches its limit, there are several
possible scenarios:
– distance/time remaining is less than 1500 km or one month: the mes-
sage “Service” is displayed accompanied by the nearest term (distance or
time);
– distance equals 0 km or date of service reached: the message “Service
required” is displayed and depending on the variants accompanied by
warning light .
The vehicle requires a service as soon as possible.
Service 100KM/
20days
Service re-
quired
Resetting: to reset the distance before service, press and hold button
1
for approximately 10 seconds until the display
shows the service mileage without flashing.
NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In
the
event of an oil change, both the distance before the next service and the next oil change should be reset.
Getting to know your vehicle - 79
|
To Next Page