Renault KWID 2024 - Bonnet Access and Safety; Opening and Closing the Bonnet

BONNET
5
102 - Maintenance
To open the bonnet, pull the knob 1 .
Unlocking the bonnet latch
To unlock, gently lift the bonnet and
push tab 2 towards left to release the
latch 4 .
Opening the bonnet
Lift the bonnet ; remove the Hood-Stay
rod 3 from lock clip from the hood and
place into the hole to hold the Hood
open.
Do not press down on
the bonnet : there is a
risk that the bonnet may
accidentally close.
Closing the bonnet
To close the bonnet again, remove the
Hood-Stay rod 3 from the hole and
place to the lock clip.Lower it to 30 cm
above the closed position, then
release it. It will latch automatically
under its own weight.
The engine may be hot
during operations in
close proximity. In
addition, the engine
cooling fan may come on at any
moment.
Risk of injury.
In the event of even a
slight impact involving
the radiator grille or
bonnet, have the bonnet
lock checked by an approved
Dealer as soon as possible.
When working in the
engine compartment,
ensure that the
windscreen wiper stalk is
in the park position.
Risk of injury.