REAR SEATS
4
Your comfort - 89
To fold the backrest
Before folding down a seatback:
– Lower the headrest fully.
– During folding, left and right seat
belts must be positioned and seat belts
should be buckled to the cushion
buckles in order to protect seat belt
jamming between seat back and latch.
– Hold straps
B
and
C
and pull them
together to unlatch the seatback.
– Hold the seatback and pull down
towards
A
,
Refitting the seatback
– Lower the headrest fully.
– During unfolding left and right seat
belts must be positioned and seat belts
should be buckled to the cushion
buckles in order to protect seat belt
jamming between seat back and latch.
– Push the seatback toward D and
ensure both latches locked properly
Allow the seatback turn on
its axis naturally without
forcing it, guiding it as it
lowers onto the seat base.
When moving the rear
bench seat, ensure that
nothing obstructs the
anchorage points (part of
the body, a pet, gravel, cloth, toys,
etc.).
When refitting the
seatback, make sure it
is correctly locked in
place.
If seat covers are fitted, make
sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Check that the rear seat belts are
positioned and operating correctly
each time the rear seat is moved.
Never allow anyone to ride in the
luggage area or on second row
seat when it is in the fold-down
position. Use of these areas by
passengers without proper
restraints could result in serious
injury in an accident or sudden
stop.
Properly secure all luggage to
help prevent it from sliding or
shifting. Do not place luggage
higher than the backrest.
When operating the backrest, be
careful not to scratch or damage
seat belts.
To Next Page
Loading...
