WHEEL TRIM, TOOLS
6
Practical advice - 119
Central wheel trim with visible
wheel bolts
(example : wheel trim
1
)
Depending on the version,the bolts are
directly accessible directly or after
removing the wheel cap.
Accessing the tools
Jack 2 and Wrench 3
Jack
2
is in a jack pouch and is placed
on the left side of the spare wheel. To
use the jack, take it out from pouch
with care. While keeping it back, fold it
up completely and replace it in the
pouch.
The wrench
3
is placed along with
warning triangle. Replace it in the
same pouch after use.
Never leave tools
unsecured in the
vehicle : there is a risk
that they may be thrown
about during braking. After use,
make sure the tools are correctly
positioned in their housings :
there is a risk of injury.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used
for carrying out repairs
underneath the vehicle or to gain
access to the underside of the
vehicle.
To Next Page
Loading...
