EasyManua.ls Logo

Renault RADIOSAT - LISTENING TO THE RADIO (3;3); Traffic Information (i Traffic); Program Type Search (PTY); Text Information (Radio Text)

Renault RADIOSAT
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PTY ........................................................................(current page)
radio-text................................................................(current page)
i Trafic ....................................................................(current page)
Jaune Noir Noir texte
GB.17
ENG_UD11887_2
R2-Ecouter la radio (XNX - Renault)ENG_NX_843-4_TTY_Renault_1
LISTENING TO THE RADIO (3/3)
Display the list of program types by
pressing
4, 5 or 21, then select a pro-
gram from the following options:
News”;
Pop music”;
Sport”;
Serious classics”;
Varied speech”.
Select a station from the list.
The system automatically suggests a
program that corresponds to the initial
selection.
Text information (Radio text)
Certain FM radio stations issue text in-
formation relating to the broadcast pro-
gram (e.g. song name).
To see this information, briefly press
2.
Note: this information is only available
for some radio stations.
Note: to return to the original screen,
press
2 or change the source.
Poor reception can sometimes cause
erratic and annoying changes in fre-
quency. In this case you should deacti-
vate the automatic frequency retuning.
When automatic retuning is active, the
E
indicator is displayed at the bottom of
the audio screen. If automatic tuning is
available for the station selected, picto-
gram
F is displayed.
To activate the RDS - AF function, refer
to the information on “Activating the
RDS - AF function” in the section enti-
tled “Audio settings”.
Traffic information (i Traffic)
When this function is activated, your
audio system makes it possible to au-
tomatically search for and listen to traf-
fic information when they are broadcast
from certain FM radio stations.
To activate the i Traffic function, refer
to the information on Activating the i
Traffic functionin the section entitled
“Audio settings”.
Once the function is activated, select
the news station then choose if you re-
quire another playback source.
Traffic information is broadcast au-
tomatically and has priority over the
source being listened to at the time.
The automatic broadcasts will not oper-
ate when listening to radio stations on
the LW and MW wavelength.
To stop traffic information from being
broadcast, press
5 or 20 at any time.
Program type search (PTY)
Select the radio source by pressing 3
or
13. Access the waveband by press-
ing
4 or 21. Select the PTY heading by
turning
5, 20 or 23.

Table of Contents

Related product manuals