Renault RADIOSAT - PAIRING;UNPAIRING A PHONE (1;2); Pairing a Phone

pairing a telephone ...............................(up to the end of the DU)
GB.27
ENG_UD11826_2
R2-Appairer / désappairer un télephone (XNX - Renault)ENG_NX_843-4_TTY_Renault_1
Phone (depending on the vehicle)
Pairing/unpairing a phone
PAIRING/UNPAIRING A PHONE (1/2)
Pairing a phone
For more information, refer to your
phone’s user guide.
In order to use your hands-free phone
system, you must pair your Bluetooth®
mobile to your vehicle before using it for
the first time.
Pairing will enable the hands-free
phone system to recognise and store a
phone.
Up to 5 phones can be stored by the
hands-free phone system, but only one
can be connected to the hands-free
phone system at any one time.
Pairing is carried out on the system and
on your phone. Your navigation system
and your phone must both be switched
on.
Note: if a phone is connected during a
new pairing procedure, it will automati-
cally be disconnected.
To pair a phone, carry out the following
operations:
– activate the phone’s Bluetooth® con
-
nection (refer to the manual for your
phone);
– display the settings menu by press
-
ing
9 then select the “Bluetooth con-
nection” menu.
– choose an “
(Empty)” location by
turning
5, 20 or 23, then press 4, 5
or
21 to display the next menu;
(Empty)
(Empty)
(Empty)
(Empty)
(Empty)
(Empty)
(Empty)
(Empty)
(Empty)
– select “Pair phone” by turning and
pressing
5 or 20;
– from your phone, run a search for
Bluetooth® equipment in the vicinity
of the phone;
– from the phone, select “My_Radiosat”
(Name of hands-free phone system)
from the list;
– on the phone’s keypad, enter the
pairing code displayed on the radio
screen.