Renault RADIOSAT - CONNECTING;DISCONNECTING A PHONE (1;2); Connecting a Paired Phone; Automatic Phone Connection

connect a telephone ..............................................(current page)
GB.29
ENG_UD11827_2
R2-Connecter / déconnecter un téléphone (XNX - Renault)ENG_NX_843-4_TTY_Renault_1
Connecting/disconnecting a phone
CONNECTING/DISCONNECTING A PHONE (1/2)
Connecting a paired phone
Your phone must be connected to the
hands-free phone system in order to
use all its functions.
No phone can be connected to the
hands-free phone system if it has not
first been paired. Refer to the informa-
tion on “Pairing a phone” in the “Pairing/
unpairing a phone” section.
Automatic connection
Once the ignition is switched on, the
hands-free phone system searches
for paired phones in the vicinity (if the
Bluetooth® connection is activated).
The search starts with the priority phone
if it has been defined (refer to the infor-
mation on “Defining the priority phone”
in the same section).
Searching will continue until a paired
phone is found (this may take up to a
minute).
A message will indicate that the phone
is connected.
Note:
– for your phone to connect automat
-
ically when the vehicle ignition is
switched on, it may be necessary to
activate the automatic Bluetooth®
connection function on your hands-
free system phone. To do this, refer
to your phone’s user manual;
– when reconnecting, and when two
paired phones are within range
of the hands-free system, the last
phone previously connected will take
priority, even if this phone is outside
the vehicle but within range of the
hands-free system.
Note: if a call is already in progress
when your hands-free phone system is
connected, the phone will automatically
be connected and the conversation will
switch to the vehicle speakers.
(Empty)
(Empty)
(Empty)
(Empty)
(Empty)
(Empty)
(Empty)
(Empty)
(Empty)