Renault RADIOSAT - CONNECTING;DISCONNECTING A PHONE (2;2); Manual Phone Connection; Phone Connection Failure; Disconnecting a Phone

disconnect a telephone..........................................(current page)
connection
failure ...............................................................(current page)
priority phone .........................................................(current page)
GB.30
ENG_UD11827_2
R2-Connecter / déconnecter un téléphone (XNX - Renault)ENG_NX_843-4_TTY_Renault_1
CONNECTING/DISCONNECTING A PHONE (2/2)
Connection failure
If connection fails, check that:
– your phone is switched on;
– your phone battery is not flat;
– your phone has already been paired
to the hands-free phone system;
– the Bluetooth® function on your
phone and on the system are active;
– the phone is configured to accept the
system’s connection request.
Note: using your hands-free phone
system for prolonged periods will dis-
charge your phone’s battery more
quickly.
Disconnect a phone
Display the settings menu by press-
ing
9 then select the “Bluetooth con-
nection” menu.
Select the phone to be disconnected
from the list then select “Disconnect
the device” by turning and pressing 5
or
20.
If the phone is switched off, the tele-
phone will be disconnected.
A message is then displayed on your
screen to confirm that the phone is dis-
connected.
Note: if a call is in progress when the
phone is disconnected, the call will
automatically be transferred to your
phone.
Defining the priority phone
Display the settings menu by press-
ing
9 then select the “Bluetooth con-
nection” menu.
Select the desired phone then select
“Define priority (number)” by turning
and pressing
5 or 20.
Manual connection (changing the
phone connected)
Display the settings menu by press-
ing
9 then select the “Bluetooth con-
nection” menu. You will find the list of
phones already paired.
Select the phone to be connected from
the list. Select “Connect the device”
and confirm by pressing
5 or 20. A
message will indicate that the phone is
connected.