2.10
ENG_UD75665_4
Fonction Stop and Start (X82 PH2 - Renault)
FUNCTION STOP AND START (3/4)
Conditions preventing the
standby of the engine
Certain conditions prevent the system
from using the engine standby function,
including when:
For all vehicles:
– the driver’s door is not closed;
– the driver’s seat belt is not fastened
or was not fastened when driving
began;
– reverse gear is engaged;
– parking distance control is in opera-
tion;
– the bonnet is not locked;
– the outdoor temperature is too low or
too high;
– the battery is not sufficiently charged;
– the difference between the vehicle
interior temperature and the auto-
matic climate control instruction is
too high;
– the altitude is too high;
– the gradient is too steep for vehicles
fitted with an automatic gearbox;
– the “Clear view” function is activated
➥ 3.8;
– the engine temperature is too low;
– the emission control system is being
regenerated;
– ...
Deactivate the Stop and
Start function for any opera-
tion performed in the engine
compartment.
Depending on the vehicle, the
warning light appears on the instrument
panel to indicate that engine standby
is not available. The warning light may
appear along with a message on the in-
strument panel:
– “Battery charge optimisation” to pri-
oritise the battery charge;
– “Heating comfort priority” to prioritise
the air conditioning;
– “Engine running priority” to prioritise
engine functions.
To Next Page
Loading...
