Renesas RL78/G13 - Page 23

RL78/G13 Safety Function (Frequency Detection)
R01AN0956EJ0100 Rev. 1.00 Page 23 of 70
Feb. 27, 2012
[Function Name] R_INTC0_Get_INTP0_Flag
Synopsis
Gets the INTP0 external interrupt occurrence flag.
Header
r_cg_macrodriver.h
r_cg_intc.h
r_cg_it.h
r_cg_userdefine.h
Declaration
uint8_t R_INTC0_Get_INTP0_Flag(void)
Explanation
This function gets the INTP0 external interrupt occurrence flag.
Arguments
None
Return value
 When an INT0 external interrupt has not occurred: 0x00
 When an INT0 external interrupt has occurred: 0x01
Remarks
None
[Function Name] R_INTC0_Clear_INTP0_Flag
Synopsis
Clears the INTP0 external interrupt occurrence flag.
Header
r_cg_macrodriver.h
r_cg_intc.h
r_cg_it.h
r_cg_userdefine.h
Declaration
void R_INTC0_Clear_INTP0_Flag(void)
Explanation
This function clears the INTP0 external interrupt occurrence flag.
Arguments
None
Return value
None
Remarks
None
[Function Name] R_IT_Get_INTIT_Flag
Synopsis
Gets the interval timer interrupt occurrence flag.
Header
r_cg_macrodriver.h
r_cg_it.h
r_cg_userdefine.h
Declaration
uint8_t R_IT_Get_INTIT_Flag(void)
Explanation
This function gets the interval timer interrupt occurrence flag.
Arguments
None
Return value
 When an interval timer interrupt has not occurred: 0x00
 When an interval timer interrupt has occurred: 0x01
Remarks
None
[Function Name] R_IT_Clear_INTIT_Flag
Synopsis
Clears the interval timer interrupt occurrence flag.
Header
r_cg_macrodriver.h
r_cg_it.h
r_cg_userdefine.h
Declaration
uint8_t R_IT_Clear_INTIT_Flag(void)
Explanation
This function clears the interval timer interrupt occurrence flag.
Arguments
None
Return value
None
Remarks
None