Renesas RL78/G13 - Getting Pulse Interval Measurement End Flag

RL78/G13 Safety Function (Frequency Detection)
5.8.15 Getting Pulse Interval Measurement End Flag
Figure 5.18 shows the flowchart for getting the pulse interval measurement end flag. This function does nothing
but returns global variable g_fCLKChangeFlag as a return value.
R_TAU0_Channel5_
Get_MeasureStatus()
return(g_MeasureEndFlag)
g_MeasureEndFlag: Pulse interval measurement
end flag
Figure 5.18 Getting Pulse Interval Measurement End Flag
R01AN0956EJ0100 Rev. 1.00 Page 46 of 70
Feb. 27, 2012