Renesas RL78/G13 - Stopping Channel 5 of TAU0

RL78/G13 Safety Function (Frequency Detection)
5.8.13 Stopping Channel 5 of TAU0
Figure 5.16 shows the flowchart for stopping channel 5 of TAU0.
R_TAU0_Channel5_Stop()
return
TMIF05 bit  0: Clear interrupt request flag.
TT0 register  0020H
TMMK05 bit  1: Disable interrupt processing for channel 5 of TAU0.
Stop channel 5 of TAU0
Figure 5.16 Stopping Channel 5 of TAU0
R01AN0956EJ0100 Rev. 1.00 Page 44 of 70
Feb. 27, 2012