RL78/G13 Safety Function (Frequency Detection)
Starting clock signal supply to the timer array unit
Peripheral enable register 0 (PER0)
: Supply clock signals to the timer array unit.
Symbol: PER0
7 6 5 4 3 2 1 0
RTCEN IICA1EN ADCEN IICA0EN
SAU1EN SAU0EN TAU1EN TAU0EN
0 0 0 0 0 0 0 1
Bit 0
TAU0EN
Control of timer array unit input clock supply
0 Stops input clock supply.
1 Enables input clock supply.
Caution: For details on the register setup procedures, refer to RL78/G13 User's Manual: Hardware.
R01AN0956EJ0100 Rev. 1.00 Page 30 of 70
Feb. 27, 2012
To Next Page
Loading...
