Renesas RL78 Series Application Note

RL78 Family VDE Certified IEC60730/60335 Self Test Library
R01AN0749EG0201 Rev.2.01 Page 36 of 50
Mar 04, 2014
4.2.3.1 Defined Symbols
The following defined symbols are included in the IAR EW assembler options section.
Each symbol is preset to enable the conditional build options for each of the self test projects selected.
This differs from the compiler settings as if the symbol is omitted then the self test is disabled. If the symbol is included
then the test is enabled. The example shown in figure 17 above enables the “initial” March X test
Table 15: Assembler Defined Symbols
March_c_initial_test_enabled Set configuration for Initial March C test
March_x_initial_test_enabled Set configuration for Initial March X test
4.2.4 Linker Settings
Figure 18 IAR EW Linker Options – Output File settings

Renesas RL78 Series Specifications

General

Brand	Renesas
Model	RL78 Series
Category	Computer Hardware
Language	English