Need help?Do you have a question about the Renishaw OMP60 and is the answer not in the manual?
General| Transmission Type | Optical |
|---|---|
| Sealing | IPX8 |
| Transmission Method | Optical |
| Protection Rating | IPX8 |
| Type | Optical transmission probe |
| Probe Compatibility | OMI-2 |
| Measurement Range | 60 mm |
| Dimensions | Diameter 63 mm |
| Stylus Trigger Force | 0.75 N typical |
Lists compatible battery types and recommended suppliers for the probe.
Step-by-step instructions and diagrams for attaching the stylus to the probe.
Instructions and illustrations for correctly inserting batteries into the probe.
Explains the meaning of LED flash patterns and directional arrows used in setting diagrams.
Details LED status indicators and procedures for switching the probe on and off.
Outlines advanced probe settings like trigger filter, optical transmission, and power.
Step-by-step guide on how to put the probe into its configuration mode.
Displays the probe's battery status after entering configuration mode.
Instructions for modifying probe switch-on and switch-off configurations.
Guide to adjusting the enhanced trigger filter settings for the probe.
Details on configuring optical transmission methods and power levels.
Instructions and diagrams for securely mounting the probe onto a machine tool shank.
Steps for adjusting the stylus to be on-centre using a 2.5 mm AF stylus.
Steps for adjusting the stylus to be on-centre using a 4 mm AF stylus.
Detailed instructions for fine-tuning stylus centering with a 2.5 mm AF stylus.
Guidance on how to clean the probe using a clean cloth.
Explains LED patterns for Low battery, Probe status, Error, and Rx Signal.
Interpretation of LED codes for various error and status conditions.
To Next Page
