CAUTION: Before unpacking and installing the PH20 system, the user should carefully read the safety instructions below and
ensure that they are followed at all times by all operators. Operators must be trained in the use and application of the PH20 system
and accompanying products, in the context of the machine it is fitted to, before being allowed to operate that machine.
Please ensure that you understand all safety instructions. Familiarisation with the PH20 system components is recommended.
CAUTION: Permanent magnets are used in some components of the PH20 system and associated products. It is important to keep
them away from items which may be affected by magnetic fields, e.g. data storage systems, pacemakers and watches etc.
Operation and maintenance
The product is only to be used with the appropriate Renishaw controller.
Installation of the PH20 system must be performed by trained personnel.
DO NOT edit any of the system files directly, the appropriate commissioning software package should only be used by trained personnel.
It is recommended that the power is removed before performing any maintenance operations.
Maintenance is restricted to procedures described in the maintenance section.
To Next Page
Loading...
Need help?
General
