Renkforce RF-DAB-AP - C) DAB Operation

DAB FM
Full scan x
Manual tune x
DRC x
Prune x
Scan setting x
Audio setting x
System x x
c) DAB Operation
Station scan
• If you cannot receive any DAB station after selecting DAB mode, push the button SCAN (2).
• ThedevicewillthenperformastationscanintheDABreceptionrangeasafterrstactivation
and saves the stations found in the station list.
• During the search, the display (9) shows progress and the number of stations found.
The station scan should be repeated after a change of location or now and then in
order to transfer new stations to the station list.
Station selection from the station list
• PushthebuttonsPREV(4)orNEXT(8),toselectthedesiredstation.
• ConrmyourselectionbypushingthebuttonSELECT(7).
Station storage
• The device can save up to 10 DAB stations.
• Select the other DAB station to be saved as described above.
• PressandholdthePRESET(6)buttonuntilthelistofthestationmemoryappearsinthe
display (9).
 Foremptystation slots,nostationnameis displayed;ifthestation slotisalready
occupied, the name of the station saved there is displayed.
34