Need help?Do you have a question about the RENNTECH AIXRO XR50 and is the answer not in the manual?
Thank you for purchasing the Aixro XR50 rotary powersports engine and provides guidance for its use.
Information regarding the manual's currency and potential deviations from actual specifications.
Identifies the intended audience for this operator manual.
Details the copyright restrictions and permissions for the document.
Explains the operating principles and advantages of the Aixro XR50 rotary engine.
Specifies the exclusive intended use of the XR50 engine in racing go-karts.
Lists and identifies the key components of the Aixro XR50 engine.
Details the installation and setup of the liquid-cooled system for the engine.
Instructions for mounting the engine and related components.
Guidance on properly tensioning the drive chain for optimal performance.
Information on recommended fuels, oil mix, and fuel line setup.
Instructions for connecting the engine's electrical components, including the stop button.
Steps for securely fastening the exhaust manifold to the engine.
Procedure for attaching the exhaust pipe, including warnings about heat.
Details on installing and connecting both optional on-board and external starters.
A checklist of essential checks before starting the engine for the first time.
Step-by-step instructions for starting the Aixro XR50 engine.
Procedure for conducting a test run of the engine after initial start-up.
Post-test run checks and confirmation before full operation.
Guidance on properly warming up and breaking in the new engine.
Tips for adjusting driving style and monitoring engine temperature.
Proper procedures for shutting down the engine after use.
List of components subject to wear and requiring regular maintenance.
Details on warranty coverage, limitations, and buyer obligations.
Steps to follow when making a warranty claim.
Key technical specifications including type, output, torque, and weight.
Specific torque values for various engine bolts and nuts.
Information on recommended fuel octane, oil type, and coolant mix.
Details on the standard carburetor and recommended settings.
Specifications for the ignition system and spark plugs.
Details on the standard clutch unit and recommended adjustments.
Information on the starter options, including battery requirements.
Details of the standard fuel pump model.
Advice on fuel/oil mix ratios and the effect of using higher octane fuel.
Recommendations for optimal operating temperature and avoiding idling.
Tips on adjusting jetting, chain slack, tire pressure, and monitoring max RPM.
Advice on clutch maintenance, exhaust heat, and avoiding engine modifications.
To Next Page
General