INTRODUCTION
1.1
PREFACE
RENNtech would like to thank you for your purchase of a new Aixro XR50 rotary powersports engine. By
doing so, you have helped set new standards for performance and environmental responsibility.
Before you get started, it is imperative that you read and understand the instructions and procedures
outlined in this operator manual. Inside, you will find information to help you with the initial setup and
maintenance of your Aixro, as well as prevent potential damage.
Again, thank we’d like to thank you - and wish you luck in all your adventures!
Sincerely,
Hartmut Feyhl
president, RENNtech INC.
1.2
STATE OF DEVELOPMENT
The procedures and instructions outlined in this manual represent the most current data available at the
time of publication. Some printed specifications may deviate from actual specs. due to advances in
production methods or design changes.
1.3
TARGET READERS
This operator manual is intended for anyone who intends to install, operate, or service the Aixro XR50
rotary engine.
1.4
COPYRIGHT INFO.
All rights reserved.
The circulation or duplication of this document, in part or in whole, is not permitted without the express
permission of RENNtech INC. and /or Aixro GmbH.
TITLE: RENNTECH / AIXRO XR50 ENGINE OPERATOR MANUAL
RENNTECH / AIXRO XR50 ENGINE OPERATOR MANUAL
To Next Page
Loading...
General