PRODUCT DESCRIPTION
2.2
AREA OF APPLICATION
Aixro’s XR50 is designed exclusively for use in racing go-karts. Any use or development of the
XR50 for other applications is strictly prohibited, except with the express, written consent of
Aixro GmbH and/or RENNtech INC.
2.3
IDENTIFYING COMPONENTS
1. ! trochoid
2. ! eccentric shaft
3. ! rotor, gaskets
4. ! carburetor
5. ! ignition module, spark coil, and spark plugs
6. ! clutch
7. ! starter
8. ! vacuum-actuated valve
9. ! throttle valve
10. ! fuel pump
11. ! side plate ignition side with static pinion and bearing
12. ! side plate output w/ bearing
13. ! exhaust manifold (aka “header”)
14. ! exhaust pipe (aka “silencer”, or ”muffler”)
15. ! water supply
16. ! kill switch
17. ! encasement
18. ! engine mount
19. ! engine support
20. ! bell housing
RENNTECH / AIXRO XR50 ENGINE OPERATOR MANUAL
To Next Page