16
Run the AC input line through the AC input cable entry slot. Make sure to use appropriate cable
sizing when working with AC. Carefully place the correct AC wire into the respective AC Input
terminal block. The order should be as follows:
AC Input Wiring
The AC Input Terminal Block is connected to circuit breakers for added protection. Do
not modify or alter them as it may cause irreversible damage to the solar inverter.
The AC input must never be connected to the AC output as irreversible overload or
damage may result
NOTE
WARNING
There are two terminal blocks with “IN” and “OUT” markings. Please do NOT
mis-connect input and output connectors.
CAUTION
：Ground | L：Live | N：Neutral
To Next Page
Loading...
