14
Input voltage is below 10.5V
Input voltage is above 16.0V
Input voltage is below 10V
Input voltage is above 16.5V
GFCI tripped
Use a higher wattage inverter or
use a lower powered device
Disconnect the inverter and turn
off the ON/OFF switch to reset
Disconnect appliances and turn
off the ON/OFF switch to reset
Inverter overheats
Operating equipment draws too
much power
Yellow LED Lit -
Inverter shut down
Fault LED Lit, inverter
shut down and alarm on
Alarm beeps
Inverter is short circuited
Keep input voltage below 16.0V
Keep input voltage above 10V
Keep input voltage below 16.5V
Allow inverter to cool down
Check for adequate ventilation
Reduce the load on inverter
Keep input voltage above 10.5V
Indicator TroubleshootPotential Issue
Inverter Troubleshooting
To Next Page
Loading...
