EasyManua.ls Logo

Renogy MT-150 - Page 2

Renogy MT-150
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Important Safety Instructions
Please save these instructions.
This manual contains important safety, installation, and operating instructions for the meter. The
following symbols are used throughout the manual to indicate potentially dangerous conditions or
important safety information.
WARNING: Indicates a potentially dangerous condition. Use extreme caution when
performing this task.
CAUTION: Indicates a critical procedure for safe and proper operation of the controller
NOTE: Indicates a procedure or function that is important to the safe and proper operation
of the controller.
General Safety Information
Read all of the instructions and cautions in the manual before beginning the installation.
There are no serviceable parts for this controller. Do NOT disassemble or attempt to repair
the meter.
Do NOT allow water to enter the controller.
Make sure all connections going into and from the meter are tight.
Battery Safety
NEVER short a rechargeable battery or the meter connected to a rechargeable battery. It
can supply high currents and cause fire explosions. Do NOT let the positive (+) and
negative (-) terminals of the battery touch each other.
Ensure wiring and connections are rated to handle the input/out current and are properly
assembled for each application
Carefully read battery manuals before operation.
Do NOT let the positive (+) and negative (-) terminals of the battery touch each other.
Recycle battery when it is replaced.

Related product manuals