— 5 —
3. Preparation
3.1. Installation Site and Environment
To ensure proper running of the RV leveling function on Renogy ONE Core, ensure it is installed in a
spot with the screen pointing to the front, rear, left, or right side of the RV, vertically to the RV floor. It is
recommended that RV leveling blocks should be used during the leveling process.
90°
90°
90°
90°
-4°F to 158°F
-20°C to 70°C
≤5000m
Altitude
KEEP DRY FRAGILE
INDOOR
Install the Renogy ONE Core indoors and prevent its components from being exposed to direct
sunlight.
Do not expose Renogy ONE Core to flammable or harsh chemicals or vapors.
Keep Renogy ONE Core out of the reach of children.
Make sure that the Renogy ONE Core is installed with ambient temperature range from -4°F to
158°F or -20°C to 70°C.
Make sure that the Renogy ONE Core is installed in an environment with relative humidity
between 0% and 95% and no condensation.
To ensure quality wireless communication for Renogy ONE, keep it away from metal objects at a
minimum distance of 200 mm or 7.9 inches.
3.2. Checking Renogy ONE Core
Inspect the Renogy ONE Core for any visible damage including
cracks, dents, deformation, and other visible abnormalities. All
connector contacts shall be clean, dry, and free of dirt and corrosion.
Do not use Renogy ONE Core if it appears to be damaged.
There are no serviceable parts in Renogy ONE Core. Do not open, dismantle, repair, tamper with,
or modify it.
Wear proper protective equipment and use insulated tools during installation.
Do not dispose of Renogy ONE Core as household waste. Comply with local, state, and federal
laws and regulations and use recycling channels as required.
To Next Page
Loading...
Need help?
General
