— 6 —
3.3. Checking DC Power
8V to 60V
Ensure that the connected DC power supply rates at 8V to 60V.
Connecting the Core to a power source beyond the range results in
a power-on failure or permanent damage to the Core.
Confirm the polarities of the devices before connecting Renogy ONE Core to a power supply. A
reverse polarity contact can result in damage to the Core, thus voiding the warranty.
Risk of electrical shock! Ensure the connected DC power is turned off before connecting it to the
Renogy ONE Core.
3.4. Extend the Power Cable
If the included power cable is not long enough for connecting Renogy ONE Core to your DC power
Recommended Tools & Accessories
Bare Wires (≥ 22 AWG) × 2Wire stripper
Confirm the polarities of the included cable and the extension one before connecting them. A
reverse polarity contact will result in abnormal operations. The extension cable should not exceed
10 meters (32.8 feet).
1. Cut the included power cable.
To Next Page
Loading...
Need help?
General
