08
Additional Components
Optional Components
Additional components included in the package:
Optional components that require a separate purchase:
This sensor measures the temperature at the battery and uses this data for
very accurate temperature compensation. Accurate temperature
compensation is important in ensuring proper battery charging regardless
of the temperature.
The BT-1 Bluetooth module is a great addition to any Renogy charge
controllers with a RS232 port and is used to pair charge controllers with the
Renogy BT App. After pairing is done you can monitor your system and
change parameters directly from you cell phone or tablet. No more
wondering how your system is performing, now you can see performance
in real time without the need of checking on the controller’s LCD.
NOTE
Do Not use this sensor when charging lithium battery.
Renogy BT-1 Bluetooth Module:
The DM-1 4G Module is capable of connecting to select Renogy charge
controllers through an RS232, and is used to pair charge controllers with
Renogy 4G monitoring app. This app allows you to conveniently monitor
your system and charge system parameters remotely from anywhere 4G
LTE network service is available.
Renogy DM-1 4G Data Module:
Remote Temperature Sensor:
These brackets can be used to mount the Rover PG MPPT charge
controller on any flat surface. The screws to mount the brackets to the
charge controller are included, screws to mount charge controller to
surface are not included.
Mounting Brackets:
EN
To Next Page
Loading...
Need help?
General
