Renovator Multi-Tool - Page 15

15
5. SECURING THE WORK PIECE
Where possible use gripping tools such as clamps or a vice
to secure the work piece.
TIP: Making a cut or using material close to an rmly anchored
point on the work piece will reduce vibration in the material
allowing for a smoother and easier cut.
CAUTION: Always check that no power cords will be
damaged whilst operating The Renovator.
4. USING THE Variable SPEED DIAL
While The Renovator is running, the variable speed dial
can be set to the optimum oscillating frequency for the
attachment tools, respective to their application.
WARNING
CLAMPS
VICE
S
P
E
E
D
D
I
A
L
V
A
R
I
A
B
L
E