23
Using the Saw Blades
CIRCULAR & SEMI-CIRCULAR EDGE SAW BLADES
Typical Application: Cutting wood, plastics, sheet metal, removing putty,
copper pipe up to 3mm, plastic pipe.
• Select mid oscillation frequency.
• Distribute the use of the saw blade evenly to maximise the life of the saw
blades. Rotate circular saw blades by loosening the blade, making sure
it is aligned on octagonal tting then tighten again.
TIP: Let the tool do the work ,
too much pressure will make
the tool hard to control.
Set the Speed Dial to 3, it will
cut easier and be easier to
control.
8 ANGLE SETTINGS
TIP: Do not over tighten the
bolt or you may damage both
the attachment and the Allen
key.
In Mega Kit only
To Next Page
Loading...
