Renovator Multi-Tool - Using the Sanding Attachments

21
Using the Sanding
Attachments
DELTA SANDING PAD & DOUBLE-SIDE MINI SANDING PAD
Typical Application: Sanding wood, metal, small areas, especially
corners, edges and places difcult to access.
1
2
3
4
ATTACH DELTA PAD
ATTACH SANDING PAD
CHECK ALIGNMENT
PRESS FIRMLY
DELTA SANDING PAD
DOUBLE-SIDE MINI
SANDING PAD
SANDING PAD
MINI SANDING PAD
• Select high oscillation frequency.
• Distribute the use of the sanding
pads evenly to maximise the life
of the pads.
• Use light pressure and a smooth
movement.
• There is no increase in sanding
performance with heavy
pressure.
• Increased pressure wears down
the sanding pad faster.
• Holes in the pads improve the
suction and removal of dust
when used with the vacuum
attachment.
Remove bolt and washer with the
Allen key provided, select required
attachment for the job, place the
attachment on top of the octagonal
face of the tool making sure that
both octagonal faces are ush and
rm with each other, place bolt and
washer back on the tool and secure
rmly. (1)
Place the sand paper onto the
Delta sanding pad and make sure it
is aligned properly. (2,3)
Press the pad down on a at
surface to make a secure
connection. Briey switch the
Renovator tool on. This provides
for good adhesion and prevents
premature wear. (4)
Attaching the Sanding Pads
In Mega Kit only In Mega Kit only