34
DIAMOND CUTTING BLADE
Typical Application: Cutting, scoring ceramic tiles.
• Select high oscillation frequency.
• Use a guide line or straight edge to help you keep the tool moving in
the right direction.
• On the top of the tile run the Diamond Blade in a smooth, back and
forth motion using a guide if needed.
• Let the Diamond cutting Blade score the tile until it has cut below
the surface glazing on the tile.
• Place the scored line of the tile on a solid edge object like a
workbench . Hold the larger side of the area to be broken rmly with
the smaller side over hanging the edge. Use a hammer and lightly
tap the tile and it should break neatly along the scored line.
BUFFER PAD & DELTA POLISHER PAD
Typical Application: Polishing copper alloy, brass, silverware
• Move the pad in a smooth, circular motion.
• Use small amounts of polishing uid for a better nish
(polishing uid not included) wipe off any excess uid.
• Keep polishing until you get the desired effect.
In Mega Kit only
TIP: Use the soft Delta Polisher pad for polishing smooth metal
surfaces; waxing the car or motorbike, even for handicraft articles.
To Next Page
Loading...
