(Refer to ‘Connecting
Attachment Tool’ instructions
on page 16)
TIP: Place washer on the
same way it was taken off or
the attachment will be loose
and vibrate causing damage to
the tool and attachment.
TIP: Use the straight edge of
the blade to allow cutting right
up to perpendicular walls and
into corners.
• Select high oscillation frequency.
• Distribute the use of the saw
blade evenly to maximise the life
of the saw blades.
Application 1: Cutting plaster board
Application 2: Putty
Removal
Application 4: Pipe Cutting
Application 3: Plunge Cutting
Application 5: Metal Cutting
To Next Page
Loading...
