Need help?Do you have a question about the Renson Camargue and is the answer not in the manual?
General| Brand | Renson |
|---|---|
| Model | Camargue |
| Category | Outdoor Furnishing |
| Language | English |
Mounting suspension brackets on the Span frame profile, including drilling and fitting.
Mounting suspension brackets on the Pivot frame profile, including drilling and fitting.
Mounting fixing brackets to the Algarve frame profile using bolts.
Electrical safety: connect each heating element to a separate 20A, curve C breaker.
Routing power cables through suspension bracket for Algarve.
Mounting the Beam onto the previously installed brackets for Algarve.
Using the Quickon connector for connecting heating element cables.
Stripping conductors of the 3G25 power cable.
Properly winding the ground conductor before connecting.
Placing conductors in the coded transit for proper wiring.
Fitting the QUICKON cable gland nut onto the contact holder.
Performing a final check of the heating element's functionality.
Verifying proper tightening of all screws and bolts.
Ensuring the blades rotate freely during final check.
To Next Page
