Renson Ellice User Manual

Handleiding
Notice de montage
Anleitung
Manual
Ellice
®

Renson Ellice Specifications

General

Brand	Renson
Model	Ellice
Category	Outdoor Furnishing
Language	English

Summary

Important Safety and Assembly Instructions

Opening the packaging

Safely unpack the product, check for damage, and store correctly.

Installing the system

Pre-installation checks, ensuring all parts are present and undamaged.

Electrical connections

Guidance on connecting electrical components as per motor installation documentation.

Starting

Steps for initial checks, connection verification, and motor function test.

Warranty

Details on warranty period, terms, and reporting procedures for issues.

Types of Installation & Dimensions

Single types of installation

Overview of different installation methods like free-standing and façade mounting.

Mounting Bases

Invisible mounting base

Information and installation details for the invisible mounting base.

Position of the Mounting Bases

Free-standing type of installation

Guidance on positioning mounting bases for free-standing configurations.

Façade mounted installation type

Instructions for correctly positioning mounting bases for façade installations.

Placing the Columns

Installing the Mounting Bases

Positioning Frame Profiles

Mounting the Frame

Checking Diagonals

Water Drainage

Fitting the Finishing Profile

Mounting the Motor

Mounting the Blades

Fitting the Stiffening Blade(s)

Mounting the Driving Profile

Connecting the Control Box + Setting Control

Activation of the snow position (only in combination with rain sensor) and frost position

How to enable special modes like snow or frost protection using the remote control.

Connecting the External Antenna (if reception range is not sufficient)

Return to the Default Setting for Motor and LED Lighting

Mounting the Lineo LED Blades (Optional)

Finishing

Mounting the Fixscreen 100EVO Slim F (≤ 4,5 M)

Mounting the Fixscreen 100EVO Slim F (≤ 4,5 m) (continued 1)

Continuation of steps for Fixscreen 100EVO Slim F, covering box and guide installation.

Mounting the Fixscreen 100EVO Slim F (≤ 4,5 m) (continued 2)

Final steps for Fixscreen 100EVO Slim F, including closing the box and setting motor limits.

Mounting the Fixscreen 150EVO F (> 4,5 M)

Mounting the Fixscreen 150EVO F (> 4,5 m) (continued 1)

Continuation of steps for Fixscreen 150EVO F, covering box and guide installation.

Mounting the Fixscreen 150EVO F (> 4,5 m) (continued 2)

Final steps for Fixscreen 150EVO F, including closing the box and setting motor limits.

Wiring Between the LED Control Box & Motor Control Box

Setting Up the LED Lighting (1st LED module)

Setting Up the LED Lighting (2nd LED module)

Configuration steps for the second LED lighting module via the control box.

Mounting the Rain Sensor

Installing the Wind Sensor

Returning to the default settings for the windsensor

How to reset the wind sensor to its factory default configuration.

Disclaimer of liability