Renson Cube - Page 132

132
Cube
®
EN
This menu allows you to reset 4 settings.
A) Clear fan list
9.1.3.3.7 • Factory reset
1
Select ‘Factory reset’ in the Installer menu and confirm with ■.
1
This menu can be used to disable the connection between the
TouchDisplay and the fan(s). Also press and hold the button on
the main pcb in order to reset the fan itself.
The fan has been successfully reset as soon as the green LED
lights up continuously.
2
Press ▼ and ‘OK’ will light up.
Confirm with ■.
3
The following screen will appear.
You now need to make a connection with the fan again.
See 9.1.3.3.5.