Need help?Do you have a question about the Renson Endura Delta Series and is the answer not in the manual?
General| Energy efficiency class | A+ |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Color options | White |
| Type | Extractor fan |
| Mounting | Ceiling mounted |
| Material | Plastic |
| Protection | Thermal protection |
Guidelines for the environmentally friendly disposal of the ventilation unit.
General instructions for compliance with safety regulations and local laws.
Guidelines for indoor installation, placement, and connection requirements.
Instructions related to contact hazard protection and potential injuries.
Explanation of the frost protection mechanism and preheater options.
Overview of the Endura Delta as a balanced ventilation system with heat recovery.
Provides detailed technical data for different Endura Delta models.
Dimensional drawing and specifications for the Endura Delta 330 T4 L model.
Dimensional drawing and specifications for the Endura Delta 330 T4 R model.
Dimensional drawing and specifications for the Endura Delta 330 T2/B2 L model.
Dimensional drawing and specifications for the Endura Delta 380/450 T4 L model.
Conditions and requirements for the general setup and assembly of the unit.
Detailed procedures for installing the unit, including conversion and component connections.
Step-by-step instructions for converting the unit from left-hand to right-hand configuration.
Recommendations for designing air duct systems, duct sizes, and connections.
Guidance on installing the TouchDisplay and connecting air quality sensors.
Detailed diagram of the unit's printed circuit board and component connections.
Instructions for connecting the Endura Delta to the mains power supply.
How to control and configure the unit using the Renson Ventilation mobile app.
Initial steps to link the unit to your home network and prepare the app.
Accessing and navigating installer-specific settings within the app.
Configuring nominal and level-specific ventilation flow rates for the home.
Process and benefits of registering the unit as an installer.
How to program and control the unit using the built-in TouchDisplay interface.
Initial setup steps for the TouchDisplay, including controller type and country selection.
Steps to configure the TouchDisplay as the primary controller for the system.
Detailed programming and configuration options via the TouchDisplay.
Basic settings adjustment menu for installers, password protected.
Managing controller settings, linking sensors, and checking status.
Procedures for diagnosing and resolving issues encountered with the unit.
Using the app's error log to identify and understand operational problems.
Routine inspection, cleaning, and replacement of unit components.
Step-by-step guide for cleaning or replacing the unit's filters.
Instructions for safely cleaning the heat exchanger to maintain efficiency.
Initial steps to link the unit to your home network and prepare the app.
Steps to connect the unit to a Wi-Fi network for app control.
Information on downloading and installing the Renson Ventilation app on mobile devices.
Navigating the app's interface and understanding its basic functions.
Main interface for viewing system status and feedback.
Activating and setting timed ventilation level changes.
Selecting specific ventilation levels for set periods.
Activating manual cooling mode for summer days.
Programming ventilation levels based on time and day schedules.
Changing basic unit, app, or network settings.
User-configurable settings for unit operation, including filters, status, and clock.
Managing filter timer settings, including reset and preset intervals.
Viewing the operational status of fans, bypass, and frost protection.
Defining start and end times for day and night periods for ventilation control.
Adjusting ventilation levels based on indoor air quality and controlling sensors.
Managing network connections, adding/removing units, and registration.
Overview of the main TouchDisplay interface and its components.
Explanation of icons and indicators on the main TouchDisplay screen.
Understanding automatic and timer modes for controlling ventilation levels.
Permanent manual control of ventilation levels via XVK switch.
Accessing timer, program points, data, and unit settings via the User menu.
Setting timed ventilation levels for specific durations.
Activating holiday mode for minimum ventilation during absences.
Activating manual cooling mode for summer days.
Programming ventilation levels based on time and day schedules.
Changing basic unit and controller settings.
User-configurable settings for unit operation, including filters, status, and clock.
Managing filter timer settings, including reset and preset intervals.
Viewing the operational status of fans, bypass, and frost protection.
Defining start and end times for day and night periods for ventilation control.
Adjusting ventilation levels based on indoor air quality and controlling sensors.
Receiving and managing filter replacement notifications.
Step-by-step guide for cleaning or replacing the unit's filters.
Instructions for safely cleaning the heat exchanger to maintain efficiency.
Official declaration stating compliance with European standards and directives.
Details the warranty period, terms, conditions, and exclusions.
Information on how to request service and maintenance for the unit.
To Next Page
