Renson Endura Delta Series User Manual

105
Endura
®
Delta
en
User
10.2.5.2 • My app
You can change some of the settings for the Endura Delta app itself using
this menu. For example, you can check to see if a new software version
of the app is available, you can see which software version is currently
installed, you can change the screen settings, and you can change the
language of the app.
10.2.5.3 • My network
You can add a new unit or remove the currently connected unit, change
the IP properties, and carry out the registration using this menu.
a) Add/change devices
You can choose which unit you want to link into the network using this
menu. Normally, there will only be one unit in your network.
b) Delete devices
You can delete a unit from your network using this menu. The link is
interrupted and you must make a new link.
c) IP properties
You can choose to link your home network and the Endura Delta via a
static IP address or a DHCP address using this menu.
d) Registration
If you chose to complete the registration later after opening the Endura
Delta app, then you can complete and send the registration using this
menu.

Renson Endura Delta Series Specifications

General

Brand	Renson
Model	Endura Delta Series
Category	Fan
Language	English