98
Endura
®
Delta
en
User
10.2.5.1 • My device
You as a user can also change several parameters with respect to the
operation of the Endura Delta in the “My device” menu.
These settings have an impact on your level of comfort with respect to the
ventilation system.
The last menu, “installer settings”, is intended for the installer and is
therefore password-protected. The parameters in the Installer menu can
affect the correct operation of your unit. Changes to this by the end user
are entirely on your own responsibility.
10.2.5.1.1 • Information
You can find information about the ventilation unit in this menu:
countryselection, warranty number, and firmware number.
a) Choice of country
You can change the regional settings using this menu. Every country
has a specific configuration for the unit based on the applicable
ventilation requirements. The configuration for the selected country is
loaded.
b) MAC address
You can find the MAC address for your unit here.
c) IP properties
You can find the IP address for your unit that is linked to your home
network here.
d) Warranty number
You can find the warranty number for your unit here. You can also find
this number on the warranty label in the manual and on the label on
the unit itself. You must have this number readily available when you
contact our after-sales service or your installer.
e) Unit firmware
This lets you see what kind of firmware is on your unit. You may be
asked for this type number when you call our after-sales service.
To Next Page
Loading...
Need help?
General
