Do you have a question about the Renson Cbase and is the answer not in the manual?
Mounting the Cbase® to a wall using integrated mounting holes and appropriate screws.
Choosing a spot and connecting ductwork for wall or ceiling mounting.
Attaching sealing caps and reductions to the unit and sealing unused extraction points.
Connecting the unit's exhaust to a roof or wall outlet via flexible ducting.
Provides the wiring scheme for connecting to a three-stage speed control switch.
Details connecting the unit for external 0-10V control.
Explains how to interpret performance graphs for airflow and pressure.
Step-by-step guide for safe cleaning and motor unit removal.