140
Cube
®
EN
10 • Errors
11 • Installing the design extraction grill
The following error appears when the connection with the fan is
lost: ‘Error lost communication with fan’.
• The TouchDisplay will automatically try to restore the connec-
tion. The error screen will only stay if the TouchDisplay does
not succeed in restoring the connection.
• To manually establish a new connection please use the Instal-
ler menu ‘Connect fan’ (see section 9.1.3.3.5)
The design grill with integrated butterfly valve can be mounted onto a wall or
ceiling or can be built in. We recommend using a serrated mounting flange for
connection the air ducts to the extraction grill.
Please consult the RENSON
®
website www.renson.eu for detailed installation instructions.
Under the section downloads\manuals you’ll find the document “installing
the design extraction grills”.
Also see section 9.1.3.3.2 for a list of possible errors.
To Next Page
Loading...
