Renson Cube - 13.2 EU declaration of conformity

14 3
Cube
®
EN
13.2 • EU declaration of conformity
VENTILATION
SUNPROTECTION
OUTDOOR
Renson
®
Headquarters
Maalbeekstraat 10 • IZ 2 Vijverdam • B-8790 Waregem • België
Tel. +32 (0)56 62 71 11 • Fax +32 (0)56 60 28 51
info@renson.be •
www.renson.eu
The manufacturer located in Europe
RENSON
®
Ventilation NV
Industriezone 2 Vijverdam
Maalbeekstraat 10
8790 Waregem
BELGIUM
declares that the demand controlled ventilation systems for residential applications mentioned below,
C
+
Cube
®
C
+
RenoCube
®
C
+
Xtravent EcoModus Compact
®
when used according to the respectively technical conditions of these products,
comply with the conditions of the European standards
• EN 13141-1 Testing components residential ventilation (supply and extraction vents)
• EN 13141-2 Testing components residential ventilation (supply and extraction grills)
• EN 13141-4 Testing components residential ventilation (fan)
• ISO 3741 Acoustic testing
• EN 55014-1 + A1 EMC (emission)
• EN 55014-2 + A1 + A2 EMC (immunity)
• EN 60335-1 + A1 + A2 + A3 + A4 Safety (general)
• EN 60335-2-80 + A1 Safety (particular requirements for fans)
implying that the products comply with the demands posed by:
• 2006/42/EC Machinery Directive, as amended and corrected
• 89/106/EEC Construction Products Directive, as amended
• Construction Products Regulation (EU) 305/2011
• 2014/35/EU Low Voltage Directive
• 1999/5/EC R&TTE Directive
• 2014/30/EU EMC Directive
The undersigned are both individually empowered to edit the technical dossier.
20 April 2016,
Paul RENSON dr. ir. Ivan POLLET
Owner Head of research
EU DECLARATION OF CONFORMITY