Renson Waves User Manual

61
ENGLISH INSTALLING WAVES
WARNING: Electrical
shock hazard
Failure to turn off the
power may result in serious
electric shock, injury and
death.
If you want to manu-
ally congure Waves
(i.e. because you have
no smartphone), wait to place
back front cover.
5. Place back housing cover and
secure with screws
4. Connect Waves to the mains
Waves is designed to run continuously and modulate between a minimum airflow rate and the set maximum airflow rate.
The power consumption per hour for Waves varies between 1 and 4.5 watts.
Waves must be connected to a double-pole fuse in the fuse box and is perma-
nently live. In a bath or shower room, this fuse must be connected to a circuit
with a circuit breaker with a sensitivity of 30 mA.
6mm +/-1
25
 0,25
11,2  0,2
15 +/- 1
6. Place back front cover and
turn clockwise until it clicks
into place
This is where the cable
enters Waves. Please check
if the opening is aligned with
the cable.
When Waves has just been
connected to the mains,
the local network (name of
Wi-Fi network: Waves_warranty
number) will be active for 40
minutes. If the local network is
not (or no longer) active, press
the blue button.

Renson Waves Specifications

General

Brand	Renson
Model	Waves
Category	Fan
Language	English