Reolink Argus 3 Operational Instruction

4English
3 English
Set up Camera Via Reolink App on Smartphone
Add the Camera to Reolink Client on PC
After setting up the camera, you can add it to Reolink Client and access the camera on your PC.
Here is a detailed how-to guide:
1. Download and install the Reolink Client from Reolink ocial website:
https://reolink.com/software-and-manual/
2. Launch Reolink Client, click “ ” on the far right side of the menu bar to add the device. Next,
choose "Scan Device in LAN".
3. Double click on the camera you want to add.
NOTICE: If the computer is not under the same LAN of the camera, you need to choose “UID” and
type in the information to add the device.
Available on the
Get it on
Add New Device
Menu
Device Settings
Live View
Enable/Disable PIR Motion
Sensor (The PIR sensor is
enabled by default.)
To set up Reolink camera, please follow the steps below:
1. Download and install the Reolink App on App Store (for iOS) or
Google Play (for Android).
2. Power on the camera.
3. Launch the Reolink App, click the “ ” button on the top right side and scan the QR code to add
the camera. Then, follow the onscreen instructions and camera voice prompts to complete the
setup procedure.
4. Input the password that you created via Reolink App earlier.
5. Click “OK” to log in.
NOTICE: To save power, the camera will be logged out automatically if no operation is conducted
for about five minutes. Once it is logged out, you have to log in again by clicking the “ ” button.
NOTICE:
• Reolink Argus 3 camera only supports 2.4 GHz Wi-Fi. 5 GHz is not supported.
• Your family can click "Access Camera" for live view after the initial setup.
Battery Status

Reolink Argus 3 Specifications

General

Field of View	120°
Audio	Two-Way Audio
Weatherproof	IP65
Wireless Standard	IEEE 802.11b/g/n
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Dimensions	121 x 90 x 56 mm
Resolution	2K (4MP)
Power Source	Rechargeable battery or solar panel
Connectivity	Wi-Fi (2.4GHz)
Image Sensor	CMOS Sensor
Video Resolution	2560 x 1440
Infrared Night Vision	Up to 10 meters (33ft) (IR LED)
Color Night Vision	Yes
PIR Detection Distance	Up to 10 meters
PIR Detection Angle	100°
Wireless Security	WPA-PSK/WPA2-PSK
Battery	5200mAh Rechargeable Battery
Power	Solar panel compatible
Local Storage	microSD card (up to 128GB)
Storage	Micro SD card
Motion Detection	PIR motion detection
Weight	330g
Lens	Fixed Lens, f=2.8mm