Reolink Argus Eco Operational Instruction

1. Please click the “ ” button in
the top right corner to add the
camera.
2. Scan the QR code on the back
of the camera.
3. Click “Connect to Wi-Fi” to
configure the wifi settings.
NOTICE:
• Reolink Argus Eco Camera only
supports 2.4GHz Wi-Fi, 5GHz is not
supported.
• Your family can click "Access
Camera" for live view after the
initial setup.
Download and install the Reolink App on App Store (for iOS) and Google Play (for Android).
Available on the
Get it on
Set up Camera on Reolink App (For Smartphone)
Please follow the prompt tones to configure the camera.
4English
3 English
Turn on the Camera
Install the Antenna
Reolink Argus Eco is turned o by default, please turn it on before setting up the camera.
NOTICE:
If the camera will not be in use
for a very long time, it’s
suggested to turn it o.
Please install the Antenna to the
camera. Turn the antenna base in
a clockwize motion to connect.
Leave the antenna in a vertical
position for best reception.

Reolink Argus Eco Specifications

Video

video resolution	1080p HD at 15 frames/sec
field of view	100° diagonal
night vision range	10 m (33 ft)

PIR Detection & Alerts

PIR detection distance	up to 10 m (33 ft)
PIR detection angle	100° horizontal
audio alert	customized voice-recordable alerts

General

operating temperature range	-10°C to 55°C (14°F to 131°F)
weather resistance	IP65 certified weatherproof
size	71 x 186 mm

Weight and Dimensions

weight	320 g (11.2 oz)
operating frequency	2412MHz—2472MHz
maximum transmitted power	18 dBm