Reolink Argus Eco Operational Instruction

4. A QR code will be generated on the phone. Please place the QR code on your phone towards
Reolink Argus Eco camera’s lens at a distance of about 20cm (8 inches) to let the camera scan
the QR code. Please make sure that you’ve ripped the protection film of the camera’s lens.
5. Follow the steps to finish the Wi-Fi settings.
6. After you created a password for your camera, please follow the steps to sync the time, and
then start live view or go to “Device Settings”.
Add New Device
Device Settings
Menu
Access the Live View
Battery Status
Enable/Disable PIR
Motion Sensor
(In default, the PIR
sensor is enabled.)
Please download the Reolink Client software from our ocial website:
https://reolink.com/software-and-manual/ and install it.
NOTICE: It’s recommended to set up the camera on Reolink App first before adding
the camera to Reolink Client.
Launch the Reolink Client software and manually add the camera to the Client.
Please follow the steps below.
1. Click “Add Device” on the
right-side menu.
2. Click "Scan Device in LAN".
3. Double click on the camera you
want to add. The information will
be filled in automatically.
4. Input the password created on
Reolink App to log in.
5. Click “OK” to log in.
• In Same Network
(In LAN)
Set up Camera on Reolink Client (For PC)
6English
5 English
r
20 cm ( 8 inches )
≈30cm(12 inch)

Reolink Argus Eco Specifications

Video

video resolution	1080p HD at 15 frames/sec
field of view	100° diagonal
night vision range	10 m (33 ft)

PIR Detection & Alerts

PIR detection distance	up to 10 m (33 ft)
PIR detection angle	100° horizontal
audio alert	customized voice-recordable alerts

General

operating temperature range	-10°C to 55°C (14°F to 131°F)
weather resistance	IP65 certified weatherproof
size	71 x 186 mm

Weight and Dimensions

weight	320 g (11.2 oz)
operating frequency	2412MHz—2472MHz
maximum transmitted power	18 dBm