Reolink Argus Eco User Manual

Reolink Wireless Battery-powered Camera
2
The screenshot used in this user manual is based on model Arugs 3 Pro. The menu and
options of your model may be different, please refer to the actual page of your own model.
1. Camera Introduction
Device Overview
Argus 2/Argus Pro
A Rechargeable battery and Wi-Fi connectivity make the camera totally wire-free.
No network or power cable, no drilling and no outlets needed. Security is simple.
You can put it anywhere you want: on a shelf or a table; at the front door or back
door; from room to room, to keep an eye on the elderly, babies or pets. Or use it at a
temporary construction site, rental house or holiday house.
1
Daylight Sensor
2
6 PCS IR LEDs
3
Lens
4
Status LED
5
Built-in Mic
6
Built-in PIR Motion Sensor
7
Speaker
8
Wall Mount
9
Rechargeable Battery
10
Micro SD Card Slot
11
Reset Hole

Reolink Argus Eco Specifications

Video

video resolution	1080p HD at 15 frames/sec
field of view	100° diagonal
night vision range	10 m (33 ft)

PIR Detection & Alerts

PIR detection distance	up to 10 m (33 ft)
PIR detection angle	100° horizontal
audio alert	customized voice-recordable alerts

General

operating temperature range	-10°C to 55°C (14°F to 131°F)
weather resistance	IP65 certified weatherproof
size	71 x 186 mm

Weight and Dimensions

weight	320 g (11.2 oz)
operating frequency	2412MHz—2472MHz
maximum transmitted power	18 dBm