Reolink Argus Pro Operational Instruction

• In Dierent Network (In WAN)
NOTICE: To save power, the
camera will log out if no
operation is conducted for
about 5 minutes. You need to
log in the camera again by
clicking the “ ” button.
1. Click “Add Device” on the right-side menu.
2. Choose “UID” as the Register Mode.
3. Type in the UID of your camera.
4. Create a name for the camera displayed on Reolink Client.
5. Input the password created on Reolink App to log in.
6. Click “OK” to log in.
Please download the Reolink Client software from our ocial website:
https://reolink.com/software-and-manual/ and install it.
NOTICE: It’s recommended to set up the camera on Reolink App first before adding the
camera to Reolink Client.
Launch the Reolink Client software and manually add the camera to the Client. Please
follow the steps below.
1. Click “Add Device” on the
right-side menu.
2. Click "Scan Device in LAN".
3. Double click on the camera you
want to add. The information will
be filled in automatically.
4. Input the password created on
Reolink App to log in.
5. Click “OK” to log in.
• In Same Network
(In LAN)
Set up Camera on Reolink Client (For PC)
7English6 English

Reolink Argus Pro Specifications

General

Field of View	130° diagonal
Audio	Two-way audio
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Motion Detection	PIR motion sensor
Resolution	1920 x 1080 (1080p)
Power Source	Rechargeable battery (solar panel compatible)
Connectivity	Wi-Fi (2.4GHz)
Night Vision	Up to 33 feet
Weatherproof	IP65
Storage	MicroSD card (up to 128GB)
Image Sensor	CMOS sensor
Video Resolution	1080p
Infrared Night Vision	Yes
PIR Detection Distance	Up to 33ft
Wireless Security	WPA2
Battery	5200mAh rechargeable battery
Power	5V/2A