English English5 6
Mount the Camera
• Do not face the camera towards any light sources.
• Do not point the camera towards a glass window. Or, it may result in poor image quality be-
cause of the window glare by infrared LEDs, ambient lights or status lights.
• Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may result
in poor image quality. To ensure best image quality, the lighting condition for both the camera
and the capture object shall be the same.
• To ensure better image quality, it’s recommended to clean the lens with a soft cloth from time
to time.
• Make sure the power ports are not directly exposed to water or moisture and not blocked by
dirt or other elements.
• With IP waterproof ratings, the camera can work properly under conditions like rain and snow.
However, it doesn't mean the camera can work underwater.
• Do not install the camera at places where rain and snow can hit the lens directly.
• The camera may work in extreme cold conditions as low as -25°C. Because when it is powered
on, the camera will produce heat. You may power on the camera indoors for a few minutes be-
fore installing it outdoors.
Installation Tips
Set up the Camera
• On Smartphone
• On PC
Scan to download the Reolink App.
Download path of the Reolink Client
Download and Launch the Reolink App or Client software, and follow the onscreen instructions to
finish initial setup.
NOTE: If you are connecting the camera to a Reolink PoE NVR, please set up the camera via the
NVR interface.
To Next Page
Loading...
Need help?
General
