Reolink E1 Pro User Manual

the camera to your router's LAN port with an Ethernet cable, and follow the steps
below.
Step 1. If your phone, the camera, and the router are on the same network and
you've enabled the Add Device Automatically option in the App Settings, you
can tap and select this device on the Devices page and skip to Step 3.

Reolink E1 Pro Specifications

General

Sensor type	CMOS
Number of sensors	1
Optical sensor size	1/2.7 \
Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Maximum operating distance	12 m
Infrared (IR) cut-off filter	Yes
Total megapixels	4 MP
Maximum resolution	2560 x 1440 pixels
Video compression formats	H.264
Pan range	355 - 30 °
Minimum illumination	0 lx
DC output current	1 A
DC output voltage	5
Power source type	DC
Built-in HDD	No
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Audio system	2-way
Ethernet LAN	-
Number of users	20 user(s)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
User access level	Administrator, User
Supported network protocols	SSL, TCP/IP, UDP, IPv4, UPnP, RTSP, SMTP, NTP, DHCP, DNS, DDNS, P2P
Mac operating systems supported	macOS
Mobile operating systems supported	Android, iOS
Security algorithms	WPA-PSK, WPA2-PSK
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 55 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 85 %
Form factor	Turret
Mounting type	Desk
Product color	White
Harmonized System (HS) code	85258900

Weight and Dimensions

Length	106 mm
Weight	200 g
Diameter	76 mm