Reolink E1 Operational Instruction

If your camera is not powering on, please try the
following solutions:
• Plug the camera into another outlet.
• Use another 5V power adapter to power up the camera.
If these won't work, please contact Reolink Support
https://support.reolink.com/.
Troubleshooting
Camera is not Powering on
If the camera failed to scan QR code on your phone,
please try the following solutions:
• Remove the protective film from the camera lens.
• Wipe the camera lens with a dry paper/towel/tissue.
Failed to Scan QR Code on Smartphone
8English7 English
Tips for Camera Placement
• Do not face the camera towards any light sources.
• Do not point the camera towards a glass window. Or, it
may result in poor image performance because of the
window glare by infrared LEDs, ambient lights or status
lights.
• Do not place the camera in a shaded area and point it
towards a well-lit area. Or, it may result in poor image
performance. For better image quality, please make sure
that the lighting condition for both the camera and the
capture object is the same.
• For better image quality, it’s recommended to clean the
lens with a soft cloth from time to time.
• Make sure the power ports are not exposed to water or
moisture or blocked by dirt or other elements.

Reolink E1 Specifications

General

Pan & Tilt	355° Pan, 50° Tilt
Audio	Two-way audio
Storage	microSD card slot (up to 128GB)
Image Sensor	1/2.7" CMOS Sensor
Wireless Standard	IEEE 802.11b/g/n
Wireless Security	WPA-PSK/WPA2-PSK
Ethernet	No
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Weight	200g
Motion Detection	Yes
Resolution	2304x1296 (3MP)
Night Vision	40 ft (12m)
Connectivity	Wi-Fi
Power	DC 5V/1A
IR Distance	40 ft (12m)
Day/Night Mode	Auto-switching
Viewing Angle	Horizontal: 87.5°, Vertical: 47°, Diagonal: 100°