Reolink FE-P - Connection Diagram; Set up the Camera

English English5 6
VGAHDMIUSB
AUDIO
OUT
DC 48V
ON
2 4 6 8
1 3 5 7
OFF
LAN
eSATA
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
Connection Diagram
Beforeusingthecamera,pleaseconnectyourcameraasinstructed
belowtofinishinitialsetup.
1.ConnectthecameratoaReolinkNVR(notincluded)withanEthernetcable.
2.ConnecttheNVRtoyourrouter,andthenpowerontheNVR.
*YoumayalsoconnectthecameratoaPoEswitchorPoEinjector.
NOTE:Thecamerashouldbepoweredwitha12VDCadapteroraPoEpowering
devicesuchasPoEinjector,PoEswitchorReolinkNVR(notincludedinthe
package).
Camera
EthernetCable
ReolinkNVR* Router
EthernetCable
Power Adapter
Set up the Camera
• On Smartphone
• On PC
ScantodownloadtheReolinkApp.
DownloadpathoftheReolinkClient
DownloadandLaunchtheReolinkApporClientsoftware,andfollowtheonscreen
instructionstofinishinitialsetup.
NOTE:
•IfyouareconnectingthePoEcameratoaReolinkPoENVR,pleasesetupthe
cameraviatheNVRinterface.